ALLWEILER screw pump Is a common industrial pump, widely used in various fields. However, due to long-term use and improper operation, oil leakage and leakage often occur. In order to solve these problems, we can take a series of prevention and solutions.

First of all, in order to avoid oil leakage and leakage problems, we should choose the appropriate ALL WEILER Screw pump 。 When purchasing and selecting pumps, we should select appropriate models and specifications according to specific work needs and environmental conditions. At the same time, we also need to check the product manual to understand the use and maintenance requirements of the pump, COLFAX agent And installation and commissioning methods. For occasions with high requirements, ALLWEILER screw pump with sealing system can be selected to improve the sealing performance.

Secondly, for the newly installed ALLWEILER screw pump, we should carry out strict installation and commissioning. Before installation, first check the pump to ensure that all its components are intact. During the installation process, we should pay attention to the selection of the installation position to ensure that the pump position is as close to the fluid source as possible to avoid the pipeline being too long. At the same time, it is also necessary to correctly select and install the pump connectors and seals according to the pump model and specifications to ensure their sealing performance.

In daily use, we also need to pay attention to the maintenance of ALLWEILER screw pump to prevent oil leakage and leakage. First of all, we should regularly check the running condition of the pump and pay attention to whether there are abnormal sounds and vibrations. At the same time, pay attention to the temperature of the pump and the use of lubricating oil, CIRCOR SECCO Timely adjust and replace the lubricating oil to maintain the normal operation of the pump. In addition, regularly check and clean the seals and sealing system of the pump to avoid oil leakage and leakage due to wear or blockage of seals.

For ALLWEILER screw pump with oil leakage and leakage problems, we can take some solutions. First of all, we can check the seals of the pump. If we find any worn or aged seals, we can replace them in time. Secondly, we can check the connecting pieces and fixing bolts of the pump to ensure their tightness and tightness. If the connector is loose or the bolt is damaged, it can be repaired or replaced. In addition, we can also check the sealing system of the pump. If there is any blockage or fault, we can clean, repair or replace it. Viking

In a word, in order to avoid the problem of oil leakage and leakage of ALLWEILER screw pump, we need to select a suitable pump, carry out strict installation and commissioning, carry out regular maintenance, and take timely solutions. Through these prevention and solutions, we can ensure the normal operation and service life of ALLWEILER screw pump, and improve work efficiency and safety.