ALLWEILER screw pump It is a commonly used centrifugal type Screw pump It is widely used in industrial fields such as lubricating oil, fuel oil, kerosene, diesel oil, aviation oil, rock oil, high-temperature oil, submersible pump, etc. To ensure that ALL Maintenance is very important for the normal operation of WEILER screw pump and prolonging its service life. The following will introduce the maintenance points of ALLWEILER screw pump.

Regular inspection: regular inspection is one of the key steps to maintain ALLWEILER screw pump. In daily use, the sealing performance of the screw pump, the working state of the motor, and the wear degree of the pump body, bearings, seals and other components should be checked regularly. If any abnormality is found, it shall be repaired or replaced in time.

Lubrication and maintenance: the bearing of ALLWEILER screw pump needs lubrication and maintenance. Before use, appropriate grease shall be injected, and the grease shall be checked and replaced regularly. At the same time, keep the grease in the pump clean to avoid impurities.

Cleaning: It is necessary to clean ALLWEILER screw pump regularly. During use, impurities and dirt are easily accumulated in the pump body, which will cause blockage or damage if not cleaned in time. When cleaning, detergent or cleaning solvent should be used to thoroughly remove impurities and dirt in the pump body.

Sealing maintenance: the sealing of ALLWEILER screw pump is very important. Once leakage occurs, it will not only cause waste of energy, but also reduce the efficiency of the pump. Therefore, each seal of the pump should be inspected and maintained regularly to ensure its normal operation. If necessary, replace the damaged seals in time.

Circuit inspection: The electrical circuit of ALLWEILER screw pump is one of the keys to its normal operation. Regularly check whether the wiring of the line is loose, whether the motor works normally, and whether the power consumption is normal. In case of any abnormality, the electrical equipment shall be repaired or replaced in time.

Observation on the operating state of screw pump: When using ALLWEILER screw pump, pay attention to its operating state at all times. If abnormal noise or excessive vibration is found, stop the machine immediately for inspection. This may be due to pump failure or external interference. Through timely observation, further expansion of the fault can be avoided. ALLWEILER screw pump manufacturer

Regular maintenance: regular maintenance of ALLWEILER screw pump is very important. Formulate regular maintenance plan according to the use condition and implement it according to the plan. Regular maintenance includes replacing wearing parts, lubricating grease, cleaning pump body, etc. Regular maintenance can prolong the service life of ALLWEILER screw pump and ensure its normal operation.

To sum up, the maintenance points of ALLWEILER screw pump agents include regular inspection, lubrication and maintenance, cleaning, sealing maintenance, circuit inspection, observation of screw pump operation status and regular maintenance. The key points of the above work are regular maintenance, timely replacement of damaged parts and attention to the operating state of the pump. Effective maintenance can ensure the long-term stable operation of ALLWEILER screw pump and extend its service life.