VIKING gear pump Is a common pump equipment, widely used in industrial fields. To ensure that Gear pump It is very important to ensure the normal operation and prolong the service life. Correct maintenance is very important. The maintenance and servicing methods of VIKING gear pump are introduced below for reference.

1、 Routine maintenance:

Regularly check the lubricating oil of the gear pump to ensure that it is sufficient, and replace the oil and oil seal as required.

Check the inlet and outlet pipes of the pump to ensure that the pipes are unblocked.

Check the fastening bolts regularly to prevent leakage or damage caused by looseness.

Check the bearings and seals of the gear pump to ensure their normal operation and replace the damaged parts in time.

Clean the external surface of the gear pump regularly to keep it clean and tidy.

2、 Lubrication and cooling:

The lubricating oil of gear pump shall be selected according to the service environment and load conditions. Check the quantity and quality of lubricating oil frequently and replace it according to regulations.

The pump bearing and gear should be properly added with grease to reduce wear and friction. COLFAX agent

The normal operating temperature of the gear pump shall not exceed the specified range. If necessary, cooling measures can be taken, such as adding cooler or cleaning the heat exchanger regularly.

3、 Prevent leakage:

Pay attention to check the sealing device of the gear pump to ensure its normal operation and replace the damaged seals in time.

Seal the pump body and add sealant to prevent leakage or foreign impurities from entering.

4、 Pay attention to the use environment:

VIKING gear pump shall be placed in a dry, ventilated place free of dust and corrosive gas to prevent corrosion of parts and dust entering the pump.

The pump shall be protected from adverse effects such as moisture, high temperature, low temperature and vibration to ensure normal operation of the pump. CIRCOR SECCO

5、 Timely maintenance after use:

After use, the gear pump should be cleaned in time to avoid the deposition of residues affecting the next use.

In case of abnormal sound, high temperature rise or unstable operation of the gear pump, the pump shall be shut down for inspection and repair or replace the faulty parts.

Maintain the gear pump regularly, such as replacing grease, checking bearings and seals, etc.

6、 Professional maintenance

In case of serious failure of gear pump, professional maintenance service shall be sought to ensure correct and safe maintenance process.

During the maintenance of the gear pump, the relevant maintenance regulations and operation manual shall be followed, and the disassembly, replacement and installation shall be carried out in strict accordance with the requirements. Viking

Summary: The maintenance and repair methods of VIKING gear pump mainly include daily maintenance, lubrication and cooling, leakage prevention, attention to the use environment, timely repair after use and professional repair. Proper maintenance can ensure the normal operation of the gear pump, extend its service life and provide reliable support for industrial production. At the same time, attention to safe operation and standardized use is also an important link to ensure long-term stable operation of gear pump.