VIKING gear pump It is a common centrifugal pump used to transport high viscosity liquid and liquid solid mixture. It has the characteristics of simple structure, stable operation, high pressure, large discharge and good wear resistance, and is widely used in petrochemical, food and beverage, medicine and other industries. Now we will introduce VIKING Gear pump Installation method and instructions of.

1、 Installation method

Determine the installation position: select a installation position according to the specific process requirements and the characteristics of the transmission medium. The installation position shall be on a solid level ground and away from the vibration source. At the same time, ensure that there is sufficient safety distance from other equipment to facilitate maintenance and operation. Viking

Check the equipment integrity and specifications: before installation, check whether the equipment is complete and confirm whether all necessary accessories and specifications are provided.

Fixing the pump body: use bolts to fix the pump body on the foundation to ensure close contact between the pump body and the foundation.

Connecting pipeline: connect the inlet and outlet pipelines according to the specific pipeline design. When connecting, ensure the tightness of the pipeline to avoid leakage. VIKING gear pump

Check the bearing and mechanical seal: before installation, check the condition of the bearing and mechanical seal to ensure that they are intact. If there is any damage or looseness, it shall be replaced or repaired in time.

Adjust the axial clearance and axial force: adjust the axial clearance and axial force according to the operating requirements of the equipment. The axial clearance can be adjusted by increasing or decreasing the number of washers.

Install the motor and coupling: according to the specific requirements, install the motor and coupling, and conduct correct adjustment and alignment to ensure the normal operation of the pump and motor.

Connect the power supply and pipeline: connect the power supply and pipeline to the motor and pump to ensure the normal supply of power and media. ASL electrostatic oil filter

Conduct trial operation: conduct trial operation after installation. During commissioning, pay attention to the working condition of each component to ensure the normal operation of the pump.

2、 Instructions

Start and stop: before starting, check whether there is medium in the pump body and pipeline. If there is no medium, fill the liquid first. After starting, pay attention to the operation of the pump. If there is any abnormality, stop the pump immediately for inspection.

Cleaning and maintenance: regularly clean the pump body and pipeline to ensure that there is no blockage in the pump to avoid damage to the equipment. In addition, the lubrication of pump body and bearing shall be checked regularly and lubricated if necessary.

Temperature and pressure monitoring: the temperature and pressure of the pump body shall be monitored to ensure that they are within the normal range. If the temperature or pressure is abnormal, stop the machine for inspection, find out the cause and repair it.

Pay attention to safety: pay attention to personal safety when operating the pump. It is forbidden to wear gloves, long sleeved clothes, etc. near rotating parts to avoid injury accidents.

Troubleshooting: In case of any fault, measures shall be taken in time for troubleshooting. General failures include blockage, leakage, loose bearings, etc. Take corresponding measures to repair different faults.

Summary: The installation method of VIKING gear pump includes the steps of determining the installation position, checking the equipment integrity and specification, fixing the pump body, connecting the pipeline, checking the bearing and mechanical seal, adjusting the axial clearance and axial force, installing the motor and coupling, connecting the power supply and pipeline, and conducting the test run. Pay attention to startup and shutdown, cleaning and maintenance, temperature and pressure monitoring, safety and troubleshooting during use. These measures can help users correctly install and use the VIKING gear pump to ensure its normal operation and extend its service life. IDEX