VIKING gear pump It is a kind of commonly used industrial equipment, which has the characteristics of simple structure, high reliability and wide application range. To ensure that Gear pump It is very important to ensure the normal operation and prolong its service life. Correct maintenance is very important.

1. Regular inspection and cleaning: regularly check the appearance of the gear pump to ensure that there is no foreign matter attached. During the cleaning process, special detergent shall be used and corrosive solvents shall be avoided. After cleaning, wipe it with a clean cloth or paper towel.

2. Lubricating gear pump: good lubrication is indispensable for the normal operation of gear pump. Regularly check the lubrication of the gear pump according to the instruction manual or the manufacturer's recommendations, and add an appropriate amount of lubricating oil. Before adding lubricating oil, the old lubricating oil and oil dirt should be removed to avoid affecting the normal operation of the gear pump. ASL electrostatic oil filter

3. Check the seals: check the seals of the gear pump regularly to ensure that they are intact, especially the sealing performance of the shaft seal. If the seal is found to be worn or damaged, it shall be replaced in time to ensure the normal operation of the gear pump.

4. Regularly check the bearing: the bearing is an important part of the gear pump, and its good condition plays a vital role in the operation of the gear pump. Regularly check the lubrication condition of the bearing. If the bearing has abnormal noise or heat, it should be replaced in time. In addition, the impurities on the bearing shall be removed regularly to avoid affecting the normal operation of the bearing. IDEX

5. Maintenance of pump body: regularly check the pump body of gear pump to ensure that it is free of cracks, deformation and other problems. At the same time, regularly check the interface of the pump body to ensure that its fasteners are not loose. If problems are found, measures shall be taken to repair or replace them in time.

6. Precautions: prevent the gear pump from starting under load to avoid damage to the equipment. During use, avoid overload operation and frequent startup and shutdown to reduce wear of equipment. In addition, the impact and vibration during the operation of the gear pump shall be avoided to avoid affecting its normal operation and service life.

7. Maintenance record: establish the maintenance record of gear pump, and timely record the inspection, maintenance and repair of gear pump. In this way, problems can be found in time and repaired and adjusted according to the records.

To sum up, the correct maintenance of VIKING gear pump is an important means to ensure its normal operation and extend its life. Through regular inspection and cleaning, lubrication of bone transmission device, inspection and replacement of seals, inspection of bearing status, maintenance of pump body, precautions and other measures, stable operation of gear pump can be ensured and its service life can be improved. IMO agent