VIKING gear pump Is a common centrifugal pump, commonly used in various industrial fields of liquid delivery and supply. Compared with other pump types, VIKING Gear pump It has some unique advantages and characteristics, and its comparison and differences with other pump types will be described in detail below.

First of all, the biggest difference between VIKING gear pump and centrifugal pump is its working principle. Centrifugal pump uses centrifugal force to suck liquid from the center and then discharge it at a high speed. The VIKING gear pump works by gradually extruding the liquid through two meshing gears. This working principle makes the VIKING gear pump have a lower speed and a smaller liquid shear force, which is more suitable for pumping vulnerable liquids and high viscosity liquids.

Secondly, compared with positive displacement pump, VIKING gear pump is a non pulsating pump type. Positive displacement pump is a pump that uses the reciprocating motion of the moving piston or plunger in the fixed chamber to push the liquid out. This design is easy to produce pulsation, and VIKING gear pump is more suitable for some occasions with high requirements for fluid process.

Third, VIKING gear pump and Screw pump Compared with, it has smaller volume. Screw pump is a pump that uses two mutually meshed screws to discharge liquid from the suction end to the discharge end while rotating. Because the working principle of the gear pump determines that its cavity volume is limited, the VIKING gear pump has a smaller delivery capacity than the screw pump. However, gear pump is one of the commonly used pump types with simple structure, reliable operation and convenient maintenance. ASL electrostatic oil filter

In addition, VIKING gear pump has the following characteristics compared with other pump types:

Wide applicability: VIKING gear pump can pump all kinds of low, medium and high viscosity liquids, including all kinds of chemicals, fuels, lubricants and food.

Compact size: the gear pump has a compact structure and a small volume, which is convenient for installation and layout. IDEX

Stable operation: since there is no liquid pulsation in the mechanical meshing process of the gear, the pump works very smoothly with low noise.

Wear and corrosion resistance: gear and housing of gear pump can be made of wear and corrosion resistant materials, which can adapt to the transportation and use environment of various liquids.

Reliable operation: the gear pump has a simple structure and no valves or movable parts, so the failure rate is low and the maintenance is convenient.

In general, VIKING gear pump has its own unique advantages and characteristics compared with other pump types. Its characteristics of low speed and no pulsation make it suitable for some specific industrial fields and processes. However, different pump types are suitable for different applications, and the selection of suitable pump types requires comprehensive consideration according to liquid characteristics, working environment, process requirements and other factors. IMO agent