VIKING gear pump Is a common centrifugal pump, widely used in industrial applications. However, for various reasons, Gear pump Failure may occur. This article will introduce the troubleshooting and maintenance guide of VIKING gear pump to help users accurately diagnose and repair gear pump faults.

1. The gear pump fails to start. Cause:

Power failure: check whether the power supply works normally.

Motor fault: check whether the motor operates normally.

Switch fault: check whether the switch of gear pump works normally.

Connection failure: check whether the connection of the gear pump is loose or damaged.

2. Causes of gear pump noise:

Loose pump body: check whether the pump body is firmly fixed.

Bearing damage: check whether the bearing is worn or damaged and needs to be replaced.

Gear damage: check whether the gear is worn or damaged and replace it.

Gear misalignment: it is necessary to adjust the gear alignment. ASL electrostatic oil filter

3. Causes of oil leakage of gear pump:

Damaged seals: check whether the seals are intact, and replace them if damaged.

Pump body damage: check the pump body for cracks or damage, and replace it if necessary.

Loose connector: check whether the connector is firm, and retighten it if it is loose.

4. Causes of unstable discharge flow of gear pump:

Inlet valve problem: check whether the inlet valve works normally, and repair or replace it if there is any problem.

Outlet valve problem: check whether the outlet valve works normally, and repair or replace it if there is any problem.

Pump body blockage: check whether there is any foreign matter blockage in the pump body, which needs to be removed.

5. Causes of gear pump over temperature fault:

Poor lubrication: check whether the gear pump is well lubricated. If not, add lubricating oil or replace it.

Loose pump body: check whether the pump body is firmly fixed, and retighten it if it is loose. IDEX

Incomplete cleaning of pump body: check whether the pump body is blocked by dirt, which needs to be cleaned.

The above are some common problems and solutions in the troubleshooting and maintenance guide of VIKING gear pump. Users can conduct troubleshooting and handling according to the actual situation. However, please note that before maintenance of the gear pump, be sure to ensure your own safety and refer to the relevant operation manual and professional advice. IMO agent