VIKING gear pump It is a fluid transmission device, widely used in petroleum, chemical, metallurgy, mining and other industries. Using VIKING Gear pump Pay attention to the following issues:

Installation position: VIKING gear pump needs to be installed on a flat and firm foundation to ensure its smooth operation and reduce vibration. At the same time, it is necessary to ensure that the connection port of the pump is aligned with the connection pipe of the transmission medium to avoid stress concentration between the pipe and the pump body.

Sealing performance: the seals of VIKING gear pump need to be checked and replaced regularly to ensure their normal operation. During use, it is necessary to pay attention to the matching between the sealing environment temperature and the medium temperature, select appropriate sealing materials, and regularly check the wear of seals to avoid leakage. COLFAX agent

Temperature control: VIKING gear pump will produce certain friction heat during operation, so it is necessary to control the temperature of pump body and transmission system. Excessive temperature will affect the normal operation of the pump and reduce the service life of the pump. Therefore, it is necessary to install a heat dissipation device to ensure that the pump temperature is within the allowable range.

Selection of lubricating oil: the transmission system of VIKING gear pump needs lubricating oil to reduce friction and energy loss. When selecting lubricating oil, it is necessary to comprehensively consider the factors such as the operating conditions, medium properties and operating temperature of the pump, and select the corresponding lubricating oil according to the requirements and recommendations of the manufacturer. CIRCOR SECCO

Pump maintenance: VIKING gear pump needs regular maintenance to extend its service life. Regularly check the wear of bearings, gears, seals and other parts, and replace damaged parts in time to ensure the normal operation of the pump. At the same time, the pump body needs to be cleaned regularly to remove impurities and dirt and keep the pump clean.

Adjustment of operating parameters: the operating parameters of VIKING gear pump include inlet and outlet pressure, flow and speed, which need to be adjusted according to the actual situation. The inlet and outlet pressure shall be kept within the design range, too high or too low pressure will affect the working effect of the pump. The flow and speed shall be adjusted according to the characteristics of the medium and transportation requirements to ensure the safe operation of the pump. Viking

Leakage problem: the sealing performance of VIKING gear pump is directly related to the leakage problem. Leakage will not only cause waste of energy and resources, but also adversely affect the production environment and the health of staff. Therefore, it is necessary to pay attention to the leakage when using the VIKING gear pump, and take corresponding measures to prevent and repair it.

Stress and vibration: VIKING gear pump will be subject to certain stress and vibration during operation. Long term stress will cause deformation of pump body and damage of parts, thus affecting the service life of the pump. Therefore, attention shall be paid to avoid stress concentration during installation, and vibration damping device shall be installed to reduce the vibration of pump body.

Opening, closing and maintenance of the pump: The Viking gear pump needs to be opened and closed correctly before shutdown, including closing the inlet and outlet valves, emptying the medium in the pump body, and carrying out corresponding maintenance work, such as cleaning the pump body, checking the seals and lubricating oil. Correct opening and closing and maintenance operation can ensure the normal startup and long-term reliable operation of the pump.

Manufacturer's guidance and technical support: When installing and using the VIKING gear pump, you need to operate according to the operation manual and technical requirements provided by the manufacturer, and you can consult the manufacturer's technical support at any time to ensure the normal operation of the pump and extend its service life.

In a word, the normal use of VIKING gear pump requires attention to the installation position, sealing performance, temperature control, lubricating oil selection, maintenance, operation parameter adjustment, leakage, stress and vibration, pump opening, closing and maintenance, etc. Only by fully paying attention to these problems can we ensure the normal operation and long-term reliable operation of VIKING gear pump. ASL electrostatic oil filter