VIKING gear pump It is a commonly used industrial pump, which is used to transport various liquids and liquid mixtures. To ensure that Gear pump It is very important to carry out regular maintenance and repair for normal operation and extended service life. How often should the VIKING gear pump be maintained?

Generally speaking, the maintenance cycle of VIKING gear pump can be determined according to the specific situation and use frequency. However, it is generally recommended that regular maintenance be carried out at least every 6 months, and more frequent inspection and maintenance be carried out when necessary. The length of maintenance interval mainly depends on the following factors:

Operating environment: If the gear pump is in a harsh working environment, such as high temperature, corrosive gas or liquid, it needs more frequent maintenance.

Use frequency: if the use frequency of gear pump is very high, the maintenance cycle should be shortened accordingly. Viking

Liquid property: if the delivered liquid is corrosive, viscous or suspended particles, it will also affect the maintenance cycle of the gear pump.

During maintenance, the gear pump needs to be cleaned, lubricated, and the seals replaced. At the same time, check whether all parts of the gear pump are damaged or worn, and whether they need to be replaced or repaired. During the maintenance, the maintenance manual and operation guide provided by the manufacturer must be strictly followed to ensure the quality and effect of the maintenance work. ASL electrostatic oil filter

In general, the maintenance cycle of VIKING gear pump should be flexibly adjusted according to the actual situation to ensure the normal operation of the pump and extend its service life. Regular maintenance can not only reduce the possibility of failure, but also improve the efficiency and stability of the pump, thus providing higher reliability and efficiency for production. IDEX