For proper use ASL electrostatic oil filter You must understand the working principle and use method of the machine. ASL Electrostatic oil filter It is a high-tech third-generation oil filtering equipment, which can be used to clean and regenerate various oils. It contains high-efficiency ion water remover, precision coarse and fine filters, and filter materials can be cleaned and reused. At the same time, various filter materials can be used to filter oil of different grades. The following describes the correct use and precautions of ASL electrostatic oil filter from the following aspects.

Set up ASL electrostatic oil filter. First, ensure that the installation position of the machine is stable, horizontal and placed stably. Connect the power supply and oil pipe. The installation of the machine can refer to the product manual. After the installation, the ASL electrostatic oil filter and related equipment should be checked to see if there are wiring errors, electric leakage and whether the machine connecting parts are secure.

Start oil filtering. Before starting oil filtering, it is necessary to flow the oil to be treated into the oil storage tank of the machine. After the machine is started, adjust the set value of each voltage of the controller. Different stages of treatment can be carried out according to different oil filtering materials.

Monitor the operation of ASL electrostatic oil filter. After the machine starts, Alfa Laval Pay close attention to the operation condition and oil filtering effect of ASL electrostatic oil filter, especially whether the filter element and filter bag of the machine have reached the stage of replacing and draining oil. At the same time, it is necessary to observe whether the machine has leakage. If leakage is found, it should be stopped in time and repaired.

Maintain ASL electrostatic oil filter regularly. After each use of ASL electrostatic oil filter, AlfaLaval centrifuge It shall be thoroughly cleaned, the accumulated materials inside the machine shall be cleaned in time, and the filter element, filter screen and various filter materials shall be cleaned to maintain the normal use of the machine. Especially for machines that have been idle for a long time, the moisture and impurities inside the machine need to be thoroughly cleaned for reuse.

Precautions for use of ASL electrostatic oil filter:

Special filter materials shall be used for oil filtration, and the filter materials shall be changed according to different occasions. The fine oil shall flow slowly after cleaning to activate the oil quality.

Before using the ASL electrostatic oil filter, read the manual carefully to understand the use methods and safety operation procedures of the ASL electrostatic oil filter.

Before starting the machine, it is necessary to prepare necessary tools and necessary safety measures. After the machine is started, it is necessary to ensure that no one can touch the electrical equipment.

It is forbidden to directly use high-pressure water gun to wash the machine, superheated steam to wash the machine, and toxic and flammable substances to clean the machine when filtering oil.

If the machine breaks down, it is necessary to cut off the power supply and oil pipe of the machine before maintenance to prevent accidents caused by improper selection of tools or wrong operation methods.

After correct installation and use, ASL electrostatic oil filter can filter out clean, pure and high-quality oil, which can help equipment get effective protection from oil pollution and improve the service life of equipment. The following precautions can effectively reduce the occurrence of faults and extend the service life of ASL electrostatic oil filter.