Alfa Laval centrifuge, as a common separation equipment, is widely used in chemical, pharmaceutical, food, beverage and other fields. The operation steps can be simply summarized as follows:

Preparation: check the external and internal conditions of the centrifuge to ensure the normal operation of the equipment. Check whether the power supply and lubrication system of the centrifuge are normal, and confirm whether safety devices such as safety valve and blow down valve are in good condition.

Loading: pour the materials to be separated into the hopper, pay attention to control the feeding speed and quantity of materials, and ensure that they do not exceed the rated capacity of the centrifuge.

Start the machine: turn on the centrifuge, set the speed and centrifugal force parameters according to the requirements in the operation manual, and then start the machine. RICHTER

Separation process: after the centrifuge operates normally, the material is pulled to the wall of the centrifuge by centrifugal force. According to the density and viscosity of the material, the separation time of different materials may be different.

Collect materials: after the separation process, open the corresponding outlet as required, and discharge the supernatant and sludge into the designated container. Alfa Laval

Shutdown maintenance: after the separation process is completely completed, shut down the centrifuge, clean up the material residues inside and outside the centrifuge, and carry out necessary maintenance.

Record data: record the operation of the centrifuge, including operating parameters, separation effect, material quality and other data for subsequent analysis and improvement.

To sum up, the operation steps of Alfa Laval centrifuge are relatively simple, but operators need to have certain professional knowledge and skills to ensure the normal operation of equipment and effective separation of materials. During operation, special attention shall be paid to safety precautions to avoid accidents. Only operating in strict accordance with the operating procedures can ensure the efficient operation of the centrifuge and the stable separation of materials. WANNER