VIKING gear pump It is a kind of fluid conveying equipment, which is widely used in the industrial field. Its flow and pressure parameters are of great significance for the use and maintenance of equipment. How to select VIKING Gear pump What about the flow and pressure parameters?

The first thing to understand is that the flow and pressure of VIKING gear pump are the main factors that determine its conveying capacity and working efficiency. Therefore, when we choose VIKING gear pump, we need to consider the demand for the flow and pressure of the transmission medium, as well as the safety assurance of the industrial system.

Selection of flow parameters

When selecting the flow parameters of VIKING gear pump, it is necessary to consider the characteristics of the transmission medium and the required fluid flow. Specifically, we can start from the following aspects:

Nature of transmission medium: different mediums have different physical and chemical characteristics, so it is necessary to select corresponding flow parameters of gear pump according to specific characteristics. In addition, the viscosity and flow pattern of the medium should also be considered to ensure the transmission efficiency of the gear pump. IMO

Calculation of flow parameters: before selecting the flow parameters of the VIKING gear pump, the flow of the medium to be transported needs to be calculated. Select the appropriate gear pump model according to the maximum flow required by the system.

Select a suitable gear pump: in addition to the calculated flow parameters, the flow parameters of the gear pump shall be determined in combination with the supporting pipeline system. It is necessary to consider the flow resistance caused by the number of buildings and equipment in the pipeline system and the impact of transmission distance.

Selection of pressure parameters

The pressure parameters of VIKING gear pump also need to consider the nature of the transmission medium, Viking And the required pressure or fluid resistance. It can start from the following aspects:

Determine the system pressure: the key to select the pressure parameters of VIKING gear pump is to determine the required system pressure. In addition, factors such as fluid resistance in the system should also be considered. Where fluid speed needs to be changed, fluid speed and grade should be changed according to the size of resistance.

Calculation of gear pump pressure: determine and select appropriate gear pump pressure parameters according to the maximum pressure required by the system. It is necessary to analyze the flow resistance of the system's flow channels, pipeline valves, channels, etc., analyze the pressure loss of the whole system, and determine the design pressure of the gear pump.

Selection of appropriate gear pump: When selecting the pressure parameters of VIKING gear pump, the flow characteristics of the pipeline system should be considered. Because there may be a lot of resistance in the system, such as valves, flow sections and circuits, which will affect the selection of pressure parameters of gear pumps.

In a word, the selection of flow and pressure parameters of VIKING gear pump is based on the requirements of fluid conveying system and process conditions. When selecting, it is necessary to fully understand the characteristics of the conveyed medium and the required flow and pressure values; The flow and pressure parameters of the matching system are calculated by scientific and accurate methods, and the appropriate gear pump model is selected according to the flow characteristics of the pipeline system. Through the above selection methods, the service life and efficiency of VIKING gear pump can reach the best state.