VIKING gear pump It is a common positive Gear pump , suitable for conveying various liquid media. When selecting and installing VIKING gear pump, the following key points should be paid attention to.

Precautions for model selection:

Determine the flow and pressure requirements: when selecting the model, it is necessary to specify the flow and pressure requirements of the liquid to be transported, so as to select the appropriate model of gear pump.

Select the appropriate material: according to the nature of the liquid transported, select the appropriate material, such as stainless steel, cast iron, etc. Gear pumps made of different materials are suitable for different liquid media to ensure that the selected gear pump can withstand the chemical properties and temperature requirements of the delivered liquid.

Consider noise and vibration: the noise and vibration level of the gear pump should be considered when selecting the model, CIRCOR SECCO Select models with low noise and vibration to reduce the impact of noise and vibration on equipment and working environment.

Consider repair and maintenance: select a gear pump model that is easy to repair and maintain, so as to facilitate the later maintenance and repair work and extend the service life of the equipment.

Installation precautions:

Stable installation: ensure that the gear pump is installed on a stable foundation to avoid tilting or instability during installation.

Connect the pipeline correctly: according to the requirements of the inlet and outlet diameters of the gear pump and the pipeline, Viking Connect the inlet and outlet pipelines correctly and ensure the connection is sealed. Avoid leakage or other problems.

Check the rotation direction: before starting, make sure the rotation direction is correct. VIKING gear pump is usually marked with an arrow to indicate the rotation direction, which should be consistent with the liquid flow direction at the inlet end.

Safe operation: before starting, ensure that the gear pump and related equipment are in normal working condition and kept clean. The rotating speed shall be gradually increased during startup to avoid sudden start and stop and excessive impact.

Observe the oil level: regularly check the oil level of lubricating oil in the gear pump to ensure that it is sufficient. Replace the lubricating oil according to the service condition, IDEX Avoid affecting the working effect due to poor lubrication. ASL electrostatic oil filter

Regular maintenance: regular maintenance of the gear pump, including cleaning, lubrication and inspection of the wear of various parts. If any abnormality is found, it shall be handled in time.

In a word, the proper selection and correct installation of VIKING gear pump can ensure its normal operation, improve work efficiency and extend the service life of the equipment. During installation, attention shall be paid to smooth installation, correct connection, correct rotation direction, safe operation, oil level observation and regular maintenance to ensure the normal operation and good working effect of the gear pump.