VIKING gear pump As a common centrifugal pump, it has a wide range of applications and can be used to transport various types of liquids. It has the characteristics of simple structure, small size, energy saving and high efficiency, so it has been widely used in petrochemical, energy, paper making, metallurgy and other industries. Under different working conditions, VIKING Gear pump It needs to face different challenges and needs, so it needs to deal with and optimize for different working conditions.
First of all, under high temperature conditions, VIKING gear pump needs to deal with the thermal expansion and cold contraction of liquid. In the high temperature environment, the liquid will expand due to heat, which will have a certain impact on the sealing performance of the gear pump and the stability of the pump body. Therefore, VIKING gear pump needs to be made of high-temperature materials, such as high-temperature bearings, high-temperature seals, etc., to ensure the normal operation of the pump.
Secondly, at low temperature, VIKING gear pump needs to deal with the problem of liquid solidification and icing. In low temperature environment, some liquids will solidify or freeze due to low temperature, which will cause the inlet and outlet of the gear pump to be blocked, thus affecting the normal operation of the pump. Therefore, under low temperature conditions, VIKING gear pump needs heating and insulation measures to prevent liquid solidification or icing.
In addition, VIKING gear pump needs to deal with the viscosity of liquid under the condition of high viscosity liquid transportation. Viking The high viscosity liquid will have a certain impact on the internal friction of the gear pump, increase the power consumption of the pump, and may lead to the blockage of the gear pump. In order to solve this problem, VIKING gear pump can adopt measures such as increasing the tooth width and using lubricating liquid to reduce the pump resistance and power consumption.
Thirdly, under the condition of corrosive liquid delivery, VIKING gear pump needs to deal with the corrosion of liquid. ASL electrostatic oil filter Corrosive liquid will erode the material of gear pump, leading to the decline of pump performance and shortened service life. To solve this problem, VIKING gear pump can be made of corrosion-resistant materials, such as stainless steel, ceramics, etc., to improve the corrosion resistance of the pump.
Finally, under the condition of high head, VIKING gear pump needs to deal with the problem of liquid head. High lift liquid transmission requires the pump to have a higher working pressure and a larger head capacity. In order to solve this problem, VIKING gear pump can adopt multi-stage pump design, or use a higher pressure pump head and a larger power motor to improve the pump head capacity.
In a word, challenges and demands under different working conditions put forward different requirements for the design and application of VIKING gear pump, IDEX For example, thermal expansion and cold contraction shall be considered under high temperature conditions, liquid solidification and icing shall be considered under low temperature conditions, liquid viscosity shall be considered under high viscosity conditions, liquid corrosion shall be considered under corrosive liquid conditions, and liquid head shall be considered under high lift conditions. Only according to the characteristics and needs of different working conditions can VIKING gear pump better meet the challenges and ensure the normal operation and long-term stable operation of the pump.
