VIKING gear pump It is a kind of pump commonly used to transport high viscosity liquid or chemical liquid. During installation, correct steps should be followed to ensure the normal operation of the pump. This article will introduce how to install VIKING Gear pump And keep it running normally.

The first step is to select an appropriate installation location. The VIKING gear pump should be installed in a place that is level, stable and easy to maintain. At the same time, ensure that the inlet and outlet of the pump are connected smoothly with the pipeline to avoid water leakage or seepage.

The second step is to install the pump support equipment. The pump must be installed with suitable support equipment, such as flanges, bolts, etc., to ensure that the pump can be firmly fixed in the installation position and can maintain normal operation.

The third step is to connect the pipeline of the pump. When connecting the pipeline, carefully check the sealing performance of each interface to ensure that the connection is firm and there is no water leakage, so as to prevent liquid leakage when the pump is running. ASL electrostatic oil filter

The fourth step is to adjust the inlet and outlet positions of the pump. After the installation, the inlet and outlet positions of the pump shall be adjusted according to the specific needs, so that the liquid can flow smoothly, and the resistance of the pipeline can be reduced to ensure the normal operation of the pump.

The fifth step is to check and adjust the running direction of the pump. Before switching on the power supply, make sure that the running direction of the pump is correct, otherwise the pump cannot work normally. The running direction of the pump can be adjusted by manually turning the pump shaft.

The sixth step is to check the sealing performance of the pump. After installation, check the sealing performance of the pump to ensure that the pump can operate normally without leakage. Viking

To sum up, the installation of VIKING gear pump needs to follow the correct steps to ensure stable operation and long-term use of the pump. I hope the above content is helpful to you. IDEX