ASL electrostatic oil filter It is an advanced oil purification equipment, which is widely used in the oil purification process of petroleum, chemical, power and other industries. use Electrostatic oil filter It can quickly and efficiently clean up oil pollution and improve the quality and reliability of oil products. The following will introduce ASL How to quickly clean the oil stain of the electrostatic oil filter.

First of all, the cleaning process of ASL electrostatic oil filter is a continuous process, which needs to go through the steps of oil feeding, filtering and purification, and oil output. These steps are described one by one below.

Oil feeding: the oil to be treated is introduced into the filtration system of ASL electrostatic oil filter through the feeding pipeline. During the feeding process, pay attention to adjusting the feeding speed and flow to ensure the normal operation of the system.

Filtration and purification: the oil to be treated enters the oil filtering system through the feed pipe, and is separated and purified through the oil filtering device. ASL electrostatic oil filter adopts advanced electrostatic filtering technology, which can effectively remove water, solid particles, colloid substances and other pollutants in the oil. Through the action of high-voltage electrostatic field, the tiny particles and pollutants in the oil will be electrostatic adsorbed on the filter element, so that the oil can be effectively purified and separated.

Oil output: the filtered and purified oil is output from the bottom of the filter element and flows out of the oil outlet of the oil filter for subsequent use or further treatment. At this time, the flow and oil quality of the oil outlet shall be checked in time to ensure that the oil defects are within the specified range. Alfa Laval

In the process of ASL electrostatic oil filter cleaning oil quickly, we also need to pay attention to the following common problems and solutions.

Filter element clogging: when the oil stain on the filter element is deposited too much, the filter element will be blocked, affecting the normal flow of oil. At this time, the filter element should be cleaned or replaced in time to ensure its smoothness.

Electrostatic field failure: the filter element of the electrostatic oil filter absorbs oil contamination through the electrostatic field. If the electrostatic field fails, the purification effect of the filter element will be reduced. At this time, check whether the power supply of the electrostatic field is normal, or contact after-sales service personnel for repair and replacement.

Improper operation: correct operation is required when ASL electrostatic oil filter is used for oil cleaning. The operator shall be familiar with the use method and precautions of the equipment, reasonably adjust the feed flow rate and flow, and avoid overloading and failure of the equipment. AlfaLaval centrifuge

To sum up, ASL electrostatic oil filter is an efficient equipment for quickly cleaning oil stains. Through oil filtering purification and electrostatic adsorption technology, impurities and pollutants in oil can be removed. During use, pay attention to the cleaning and replacement of the filter element to ensure the normal operation of the equipment. In addition, the operator should be familiar with the use of the equipment, reasonably adjust the feed flow rate and flow rate, and ensure the stable operation of the equipment. Through scientific operation and maintenance, ASL electrostatic oil filter can quickly and efficiently clean the oil, so that the oil can be effectively purified and improved.