ASL electrostatic oil filter It is a kind of equipment used to filter and clean solid particles and impurities in liquid. It uses the electrostatic adsorption principle to adsorb the impurities in the oil to the filter screen through the electrostatic field, so as to achieve the purpose of purifying the oil. To ensure that Electrostatic oil filter Regular maintenance is required for normal operation of. The following will describe in detail ASL Maintenance of electrostatic oil filter.

First, clean the filter screen regularly. The filter screen is a key part of the electrostatic oil filter, which needs to be kept clean to ensure its filtering effect. Before cleaning the filter screen, it is necessary to turn off the power supply of the machine and drain the oil completely. Then, take out the filter screen and gently brush the dirt on the surface of the filter screen with a soft brush. Be careful not to use a stiff brush to avoid damaging the filter screen. After cleaning the filter screen, it needs to be washed with clean water and put back to the original place after drying. Alfa Laval

Secondly, replace the filter screen regularly. Although the filter screen can be repeatedly cleaned and used, with the increase of use times, the pores of the filter screen will be blocked, affecting the filtering effect. Therefore, it is recommended to replace the filter screen at regular intervals. The specific replacement cycle can be flexibly adjusted according to the actual situation, usually after 5000 hours of continuous use. When replacing the filter screen, it is necessary to purchase a new filter screen with the same specification as the original filter screen and operate according to the instructions.

Again, keep the machine clean. During use, the external shell of the electrostatic oil filter is easy to accumulate dust and oil stain, which affects the appearance and may reduce the heat dissipation performance. Therefore, it is recommended to clean the external surface of the machine regularly with a soft cloth or brush. Pay special attention not to use corrosive chemical detergent to avoid damaging the machine shell.

In addition, regular maintenance shall be carried out. Generally, the maintenance of the electrostatic oil filter needs to be carried out by professional technicians. They will check whether each part of the equipment operates normally, whether there is wear or looseness, and carry out necessary repair and replacement. At the same time, it is also necessary to carry out safety inspection on the circuit and electrical equipment to ensure that the power supply and grounding lines are normal, and to deal with faults and leakage in a timely manner.

Finally, pay attention to safe use. When using the electrostatic oil filter, follow the relevant operating procedures and safety operating specifications. Especially when cleaning the filter screen and maintaining, cut off the power supply and take corresponding protective measures to avoid accidental injury. AlfaLaval centrifuge

In conclusion, to ensure the normal operation of ASL electrostatic oil filter, it is necessary to regularly clean the filter screen, replace the filter screen, keep the machine clean, regularly maintain and pay attention to safe use. Through correct maintenance, the service life of the equipment can be extended, the filtering effect can be improved, and the safe and stable operation of the equipment can be ensured.