IMO screw pump The utility model is a fluid conveying equipment commonly used in the industrial field, and its working noise is relatively high. The noise of the pump can be reduced from the following aspects:

Select low-noise model: purchase IMO Screw pump The low-noise model can be selected. Manufacturers generally provide products with different noise levels. Choosing products with lower noise levels will help reduce working noise.

Install sound insulation materials: install sound insulation materials around the screw pump, such as sound absorbent cotton, which can effectively absorb noise and reduce noise generated during operation. The sound insulation material can be pasted on the shell of the screw pump and the surrounding equipment. At the same time, the sound insulation material can be laid on the wall, floor, ceiling and other positions of the pump room.

Installation of silencer: the silencer is installed on the inlet and outlet pipes of IMO screw pump, which can effectively reduce the noise generated during pipeline transmission. The working principle of muffler is to reduce noise by absorbing part of energy and reflected waveform. The noise reduction effect can be achieved by selecting appropriate muffler model and installation location. IMO agent

Correct installation position: correctly install IMO screw pump on a stable foundation, which can effectively reduce vibration and noise during operation. The use of mechanical shock absorbers and other devices to reduce vibration will also help reduce noise.

Regular maintenance: regular maintenance of IMO screw pump and timely replacement of worn parts and lubricating oil can maintain the normal operation of the pump and reduce the noise generated during operation.

Adjustment of working parameters: reasonable adjustment ALLWEILER screw pump The working parameters of the pump, such as speed and displacement, can reduce the noise of the pump. When using the screw pump, adjust it according to the actual flow demand to avoid excessive noise caused by overload. ALLWEILER

Control the sound source of the pump: according to the specific situation, the sound source can be controlled, such as adding a sound insulation cover or a sound insulation cover. These devices can isolate noise in the hood, reduce leakage and diffusion, and achieve the effect of reducing noise.

It should be noted that the noise level of IMO screw pumps of different models and specifications will vary during operation. The above methods are only for reference. The actual noise reduction effect needs to be adjusted and optimized according to the specific situation. At the same time, during noise reduction, ensure that the normal operation and efficiency of the screw pump are not affected.