IMO screw pump It is a common industrial pump, used to transport high pressure, high temperature, high viscosity fluid. IMO under maintenance Screw pump We should pay attention to the following aspects:

Safety precautions: before repairing IMO screw pump, first ensure your own safety. Wear appropriate safety protection equipment, such as work clothes, safety shoes, gloves, goggles, etc. And ensure that the tools and maintenance equipment used comply with safety standards.

Power off and marking: before maintenance, disconnect the power supply of the screw pump to ensure that there is no voltage between the power cord and the power plug, so as to avoid electric shock accidents. After the power is cut off, labels or other means can be used to mark, so that the corresponding socket can be accurately found in the future and other personnel can be notified. IMO agent

Clean the working area: When repairing the screw pump, it is necessary to ensure that the surrounding working area is clean and tidy. Clear sundries and unnecessary articles in the working area to ensure a safe working environment and facilitate maintenance.

Check the power cord and motor: before maintenance, check the power cord and motor of the screw pump for damage, looseness or aging. If there is any problem, it needs to be replaced or repaired in time to ensure the normal operation of the power cord and motor.

Pressure release: pressure release is required before the screw pump is repaired to prevent accidents during maintenance. The pressure can be released by opening the vent valve on the pump or by other means.

Disassembly: When disassembling the screw pump, mark the disassembled parts first to ensure that they can be accurately assembled back after disassembly. Pay attention to the sequence and method of disassembly, and follow the instructions in the operation manual or maintenance manual.

Cleaning and inspection of parts: When disassembling the components of the screw pump, pay attention to the condition of cleaning and inspection of parts. Clean the parts with a soft cloth or brush. Check whether the parts are damaged, worn or corroded, and replace them in time if there is any problem. ALLWEILER

Repair and replacement of faulty parts: If faulty parts are found during inspection, they need to be repaired or replaced. Maintenance needs to follow the guidance of the maintenance manual and use appropriate tools and methods to repair. When replacing parts, make sure to select the correct specification and model to ensure the normal operation of the screw pump.

Cleaning and lubrication: Before assembling the screw pump, lubricate the cleaned parts. Use appropriate lubricant and ensure that lubricant can be evenly applied on the surface of parts to avoid excessive or insufficient lubricant.

Assembly and commissioning: during assembly, the operation shall be carried out in reverse order, and the correct installation of each component shall be ensured. After assembly, commissioning is required to ensure that the screw pump operates normally without abnormal sound and leakage. Gradually increase the pressure and observe the working condition of the screw pump.

Test and acceptance: after the screw pump is repaired, the corresponding test and acceptance work shall be carried out. It can be carried out by means of loading test and leakage test to ensure that the performance of the screw pump meets the requirements and can work normally.

repair ALLWEILER screw pump Be careful and patient, operate in accordance with the operation manual and relevant technical guidance, and follow the operating procedures and safety specifications. At the same time, develop the habit of regular maintenance and inspection of the screw pump, which can extend the service life of the screw pump and improve safety and reliability.