ASL electrostatic oil filter It is a very common equipment, which is mainly used to filter impurities and pollutants in the oil, ensure the cleanliness of the oil, and extend the service life of the machine. However, after a long time of use, the oil filter is blocked and dirt accumulates, which requires cleaning. Next, I will introduce in detail ASL Electrostatic oil filter Cleaning steps and precautions.

1、 Preparation before cleaning

Before cleaning, the following tools and materials need to be prepared:

1. Cleaning agent: You can purchase the cleaning agent designated by the manufacturer or other cleaning agents suitable for ASL electrostatic oil filter.

2. Washer: high-pressure water gun or other cleaners can be used.

3. Protective equipment: wear gloves, work clothes, safety glasses and other work articles to protect personnel safety.

2、 Cleaning steps

1. Shutdown: before cleaning the ASL electrostatic oil filter, the equipment needs to be shut down first to avoid damage to the equipment during cleaning.

2. Unloading parts: Alfa Laval Remove the filter plate, filter grid, filter element, oil tank and other oil filtering parts of ASL electrostatic oil filter.

3. Applying cleaning agent: apply the prepared cleaning agent on the surface of filter plate, filter grid, filter element, oil tank and other parts.

4. Add water for cleaning: after evenly applying the cleaning agent, use the washer to add water to wash the filter plate, filter grid, filter element and other parts until there is no dirt. At the same time, it is necessary to keep the water pressure intensity and water flow direction consistent.

5. Clean the oil tank: wash and clean the oil tank with a washer.

6. Sorting parts: wash the cleaned filter plate, filter grid, filter element, oil tank and other parts thoroughly, and dry them for use.

7. Installation parts: reassemble and fix the cleaned filter plate, filter grid, filter element, oil tank and other parts according to the original path.

8. Startup inspection: after installation, check whether the filter plate, filter grid, filter element and other parts are fixed again, and then start ASL electrostatic oil filter for test.

3、 Precautions

1. Remove the power cord of the oil filter before cleaning to ensure the safety of personnel.

2. When cleaning filter plate, filter grid, filter element and other parts, AlfaLaval centrifuge It is necessary to ensure that the flow and pressure of cleaning water are appropriate to avoid damaging the equipment.

3. Pay attention to the use of proper amount of cleaning agent, and do not use too much cleaning agent to avoid corrosion of equipment.

4. After cleaning, filter plate, filter grid, filter element, oil tank and other parts need to be fully dried to avoid failure in future use.

These are all the steps and precautions for ASL electrostatic oil filter cleaning. I hope this article can help you.