VIKING gear pump is a common industrial equipment, which is often used to transport high viscosity liquid or semi-solid materials. Proper cleaning and maintenance are essential to maintain the performance and life of this pump. The following are some common methods for cleaning and maintaining the VIKING gear pump:

Cleaning method:

Dismantle the gear pump: before cleaning, it is necessary to remove the housing and internal parts of the gear pump. Please keep relevant parts during disassembly for reassembly after cleaning.

Clean the housing and internal parts: Use mild detergent and clean water to clean the housing and internal parts of the gear pump. Ensure that all surfaces are thoroughly cleaned to remove any dirt and residues.

Check the seals and bolts: check the seals and bolts of the gear pump after cleaning. If damaged or worn, replace it immediately. ASL electrostatic oil filter

Maintenance method:

Regular inspection and lubrication: regularly inspect all parts of the gear pump, including gears, bearings and seals. Ensure that they are in good condition and fully lubricated to ensure the smooth operation of the gear pump.

Prevent overheating: When running the gear pump, pay attention to monitoring the temperature of the pump. If the gear pump overheats, immediately shut down and check for possible causes, such as insufficient lubrication or excessive wear.

Replace wearing parts regularly: some parts in the gear pump are easy to wear, such as seals and hoses. These components should be checked regularly and replaced as needed. IDEX

The service life of VIKING gear pump depends on the operating conditions and frequency. Proper cleaning and maintenance can extend the service life of the pump. Generally speaking, if regular cleaning and maintenance are carried out, the service life of the gear pump can reach 5-10 years or even longer. However, if the pump is frequently operated under excessive load or incorrect service conditions, the service life of the pump may be affected.

In general, proper cleaning and maintenance is the key to maintain the performance and life of VIKING gear pump. Regular inspection, cleaning and replacement of wearing parts can ensure the normal operation of the pump and extend its service life. I hope the above information will help you. IMO agent