Correct judgment IMO screw pump The cause of the failure of needs to be carefully analyzed and investigated. I will introduce several general methods as follows:

Observe the running state of the pump

First, by observing IMO Screw pump Operation status, check whether there are exceptions. For example, whether the running speed of the pump is normal, whether the noise is too large, whether the vibration exceeds the specified range, etc. If there is any abnormal phenomenon, the cause of pump failure can be preliminarily judged.

Check consumables

Secondly, check and eliminate the failure of consumables. For example, check whether the oil is clean, whether the filter element needs to be replaced, whether the connection part is loose, and whether the seals are aged or damaged.

Check mechanical parts

Then, check the mechanical parts of IMO screw pump. For example, dismantle the pump head, check the wear of screw, bearing, shaft sleeve, sealing end and other parts, and check whether they need to be repaired or replaced.

Troubleshooting through data analysis

Finally, according to the comparative analysis of relevant data, further determine the cause of the fault. For example,, IMO agent By measuring the change of flow, pressure, temperature and other parameters, analyze the error between them and the theoretical value and other working conditions, and then judge whether the fault occurs inside the pump.

In general, many factors need to be comprehensively considered to determine the cause of IMO screw pump failure. Especially when dealing with more complex faults, Viking Methods such as gradually reducing the scope, layer by layer analysis and data comparison can be used to more accurately eliminate the fault and find the root cause, so as to improve the repair efficiency and pump reliability.