IMO screw pump It is a common industrial pump, usually used to transport various fluids, such as petroleum, chemical liquids, food, etc. Use IMO correctly Screw pump It can effectively improve production efficiency, extend equipment life, and reduce equipment failure and maintenance costs. Here are some tips for using IMO screw pumps.

First, before using the IMO screw pump, ensure that the equipment is installed correctly and the pipeline is connected properly. Check whether all parts of the pump are complete, undamaged and correctly connected. If there are any problems, please contact the manufacturer or professional technicians to solve them.

Secondly, before starting the IMO screw pump, confirm that the rotation direction of the pump is correct. Confirm whether the rotation direction of the pump meets the requirements according to the equipment identification and instructions. Reverse rotation will damage the equipment and cause accidents. IMO agent

Then, when using IMO screw pump, the temperature and pressure of the medium should be controlled. Different media have different requirements for the pump, and too high or too low temperature and pressure will damage the equipment. Therefore, before pumping the medium, the nature of the medium should be known in advance, and the working parameters of the pump should be adjusted according to its requirements.

Then, regularly check the lubrication of IMO screw pump. The lubrication of pump is one of the important conditions to ensure the normal operation of equipment. Regularly check the quantity and quality of lubricating oil, replace the lubricating oil in time, and ensure that all parts of the pump can operate normally.

In addition, during the operation of IMO screw pump, pay attention to the working state of the pump. Pay attention to the vibration, sound and temperature change of the pump. Once abnormal conditions are found, stop the pump immediately for inspection and troubleshooting to avoid more serious consequences.

Finally, IMO screw pump shall be maintained regularly to extend the service life of the equipment. Regularly clean all parts of the pump, check the wear of the screw and accessories, and timely replace the severely worn parts to maintain good equipment performance.

In general, the correct use of IMO screw pump can improve the working efficiency of equipment, extend the service life of equipment, reduce maintenance costs and ensure the safe operation of equipment. I hope the above tips can help you to better use the IMO screw pump. ALLWEILER