ALLWEILER screw pump Is a common industrial pump, used to transport various fluid media. Correct repair and maintenance can extend the service life of the pump and improve the working efficiency. The following is about ALL WEILER Screw pump Methods and precautions for repair and maintenance.

1、 Maintenance method

Regular inspection: check the working condition of the pump regularly, including the vibration, noise, temperature, etc. of the pump. Any abnormal situation shall be handled in time.

Clean the pump body: regularly clean the surface of the pump body and the surrounding environment, ensure that there is no debris attached, and maintain good ventilation.

Replace seals: according to the service life or leakage, replace the seals of the pump regularly. When replacing the seals, pay attention to selecting the specifications and materials consistent with the original ones.

Change lubricating oil: change lubricating oil regularly according to the requirements of the operation manual. At the same time, regularly check the working condition of the lubrication system to ensure that the pump lubrication is normal.

Replacement of worn parts: screw, pump casing and other parts of the screw pump will be worn due to long-term use. If the wear is too large, it should be replaced in time.

Overhaul the motor: regularly check the working state and electrical connection of the motor to ensure its normal operation. COLFAX agent

Maintenance accessories: including checking the pump filter, shock absorber and other accessories to ensure their normal operation.

Leakage treatment: if leakage is found, find out the cause of leakage in time and deal with it, so as not to affect the working environment and pump performance.

2、 Maintenance precautions

Regular maintenance: according to the requirements of the operation manual, formulate a regular maintenance plan and carry out maintenance work.

Pump temperature control: strictly control the pump body temperature to avoid damage to pump components caused by too high or too low temperature. CIRCOR SECCO

Selection of lubricating oil: select appropriate lubricating oil for filling, and select appropriate lubricating oil brand and additives according to the operating environment and pump requirements.

Regular lubrication: lubricate the pump regularly to ensure the normal operation of the lubrication system. Lubrication of lubricated parts shall be carried out according to the requirements of the operation manual.

Pay attention to safety: pay attention to work safety during repair and maintenance. Do not disassemble and install the pump when it is running.

Keep clean: keep the pump and surrounding environment clean to prevent impurities from entering the pump. Viking

Regular inspection: regularly check all parameters of the pump, including flow, pressure, temperature, etc., to ensure the normal operation of the pump.

Pump shutdown for maintenance: When the pump is shut down for maintenance for a long time, the residual liquid in the pump should be emptied to prevent the medium in the pump from corroding the pump components.

The above are the methods and precautions for the repair and maintenance of ALLWEILER screw pump. Correct repair and maintenance can ensure the normal operation of the pump, extend the service life of the pump and improve the working efficiency.