ALLWEILER screw pump It is a commonly used industrial pump, which needs regular maintenance during use to ensure the normal operation of the pump and extend its service life. The following will describe in detail ALL WEILER Screw pump Maintenance and service methods.

Regularly check the use of lubricating oil: ALLWEILER screw pump uses lubricating oil for lubrication, and regularly check the use of lubricating oil during use. First, check the lubricating oil level to ensure that the lubricating oil is within the normal range; Secondly, check the cleanliness of the lubricating oil. If foreign matters or turbidity are found in the lubricating oil, replace it with a new one in time; Finally, check the oil quality of the lubricating oil. If the lubricating oil is found to be deteriorated, it can be considered to carry out targeted cleaning and replacement.

Regularly check the use of seals: The seals of ALLWEILER screw pump are important parts to prevent medium leakage, and the use of seals needs to be regularly checked. First, check whether the seals are worn or aged, and replace them if necessary; Secondly, check whether there is leakage in the sealing element, which can be detected by checking whether there is leakage around or through the instrument; Finally, lubricate and maintain the seals regularly to extend their service life.

Regularly clean the internal parts of the pump: The ALLWEILER screw pump manufacturer will accumulate sediment or impurities during long-term use, so it is necessary to regularly clean the internal parts of the pump. First, the inlet and outlet valves and pipes of the pump need to be disassembled to take out the internal parts of the pump; Secondly, clean the internal parts with detergent or solvent, which can be wiped with a brush or soft cloth to ensure that the internal parts are clean; Finally, drying treatment is required after cleaning to prevent parts from rusting due to moisture.

Regularly check the motor and drive parts of the pump: The motor and drive parts of ALLWEILER screw pump agents are the key parts to ensure the normal operation of the pump, which need regular inspection and maintenance. First, check the running state of the motor, including current, voltage, speed and other parameters to ensure that the motor works normally; Secondly, check whether the drive parts of the pump are loose or worn, and tighten or replace them if necessary; Finally, lubricate and maintain the transmission parts to ensure their normal operation.

Regular trial operation and troubleshooting of the pump: ALLWEILER screw pump may have faults during long-term use, so regular trial operation and troubleshooting are required. First of all, it is necessary to test run the pump and check whether the various indicators of the pump are normal, including flow, pressure, temperature and other parameters; Secondly, if a fault is found and needs to be eliminated in time, inspection and maintenance can be carried out according to the fault phenomenon; Finally, after the trial run, the results of the trial run and the troubleshooting process need to be recorded to provide reference for subsequent maintenance and servicing.

The above is a detailed introduction to the maintenance of ALLWEILER screw pump. Regular inspection of the use of lubricating oil, inspection of the use of seals, cleaning of the internal parts of the pump, inspection of motor and transmission parts, commissioning and troubleshooting can effectively ensure the normal operation of ALLWEILER screw pump and extend its service life. When carrying out maintenance, specific operations should be carried out according to the actual situation and in strict accordance with the operation manual and relevant regulations.