IMO screw pump It is a commonly used industrial pump, widely used in petroleum, chemical, pharmaceutical and other fields. In order to meet different process requirements, IMO needs to Screw pump Make adjustments. The following details how to adjust IMO screw pump to meet different process requirements.

First, adjust the speed of IMO screw pump. The speed can be adjusted by controlling the speed of the motor or by adjusting the frequency converter. The speed adjustment will affect the flow and pressure of the pump. If greater flow and higher pressure are required, the speed can be increased; If smaller flow and lower pressure are required, the speed can be reduced. The rotation speed shall be adjusted according to the specific process requirements to achieve the best effect. COLFAX agent

Secondly, adjust the inlet and outlet valves of IMO screw pump. The inlet valve can be used to control the feed volume of the pump, while the outlet valve can be used to control the discharge volume of the pump. The flow and pressure of the pump can be adjusted by adjusting the opening of the inlet and outlet valves. If it is necessary to increase the flow and pressure of the pump, IMO agent The opening of inlet and outlet valves can be appropriately increased; If the flow and pressure of the pump need to be reduced, the opening of the inlet and outlet valves can be appropriately reduced. Adjust the valve opening according to the specific process requirements to achieve the required flow and pressure.

Adjust the pump chamber volume of IMO screw pump. The volume of the pump chamber is one of the important factors affecting the flow of the pump. The flow of the pump can be changed by adjusting the volume of the pump chamber. If the pump flow needs to be increased, the pump chamber volume can be appropriately increased; If the flow of the pump needs to be reduced, the volume of the pump chamber can be appropriately reduced. The volume of the pump chamber can be adjusted by replacing a suitable pump chamber, or by adjusting the position of the rotating parts.

Finally, adjust the material of IMO screw pump. The pump body and rotating parts of IMO screw pump can be made of different materials to meet different media and process requirements. For some special media, such as corrosive media or high-temperature media, the pump body and rotating parts need to be made of corrosion-resistant or high-temperature resistant materials to ensure the normal operation and safety of the pump. ALLWEILER

Through the above adjustment measures, IMO screw pump can adapt to different process requirements. Of course, before adjusting IMO screw pump, it is necessary to carry out reasonable design and selection according to specific process requirements to ensure the pump performance and use effect. In addition, IMO screw pumps need to be regularly inspected and maintained during use to keep them in good working condition. ALLWEILER screw pump