IMO screw pump It is a device commonly used in industrial production, ship transportation and other occasions to transport various liquid materials. Due to some potential safety hazards and operation points during transportation, IMO is used Screw pump Pay attention to the following items.

1. Select appropriate pump type

IMO screw pump is divided into internal and external meshing models, and the appropriate pump type needs to be selected according to the specific use environment and the characteristics of the conveying materials. The internal mesh pump is suitable for conveying materials with low viscosity and small particles, while the external mesh pump is suitable for conveying materials with high viscosity and large particles. At the same time, pay attention to whether the rated head, flow, speed and other parameters of the pump are consistent with the use requirements.

2. Install the pump body correctly

When installing the IMO screw pump, pay attention to the position of the pump body to avoid deformation or damage caused by excessive force. The pump body shall be installed on a fixed and stable foundation, and the sealing at each interface shall be reliable to avoid leakage.

3. Improve the maintenance level

IMO screw pump needs regular maintenance, including cleaning, lubrication, inspection and replacement of vulnerable parts. Especially when using high viscosity, high temperature or corrosive liquid, it is necessary to strengthen maintenance to ensure the normal operation and service life of the pump.

4. Pay attention to safety protection measures

When transporting IMO screw pump, corresponding safety protection measures must be provided, IMO agent Such as installing shield, isolation net and safety switch to ensure the personal safety of operators. At the same time, when refueling, cleaning and replacing vulnerable parts, the corresponding safety operation procedures and protective measures should also be observed.

5. Observe the instruction manual

The user manual of IMO screw pump contains provisions on installation, use, maintenance and troubleshooting. Users should carefully read and comply with the corresponding provisions. In case of problems or doubts, consult the manufacturer or relevant technicians to solve and eliminate the problems in time.

6. Troubleshooting in time

If IMO screw pump has faults or abnormal conditions, it shall be checked and handled in time to avoid delaying the work progress or causing greater harm. When troubleshooting, it is necessary to identify the fault point and cause through observation, hearing, touching, inspection and other ways, and then take corresponding measures to solve it.

In a word, the use of IMO screw pump requires careful compliance with the operating procedures and safety requirements to improve the level of maintenance and troubleshooting, Viking To ensure the normal operation and use effect of the pump. At the same time, the manufacturer should also provide relevant technical support and after-sales service to provide users with more professional and considerate maintenance services.