IMO screw pump What are the differences and advantages from traditional centrifugal pumps? It is a high-efficiency, long-life, low maintenance pump, widely used in sewage treatment, chemical engineering, food manufacturing and other industrial fields. Correct installation and maintenance of IMO Screw pump It plays a vital role in improving the use efficiency of the pump, extending the service life of the pump and reducing the operation and maintenance costs.

1、 Installing IMO screw pump

1. Choose a stable ground: IMO screw pump must be installed on a stable ground to ensure stable operation of the pump and reduce vibration and noise.

2. Select an appropriate location: The pump should be installed indoors to avoid exposure to sunlight, rain and harsh environment.

3. Installation foundation: The installation foundation of IMO screw pump must be solid, flat and meet the design standards. The foundation shall have sufficient bearing capacity and avoid friction between the pump and the foundation.

4. Install inlet pipes and manholes: the inlet pipes shall be smooth and free from obstruction, and the manholes shall be reliably sealed to facilitate maintenance at any time.

5. Temperature: IMO agent The installation ambient temperature of IMO screw pump shall be between 5 ℃ and 40 ℃.

2、 Maintain IMO screw pump

1. Keep clean: clean the pump regularly to prevent the accumulation of impurities and dirt and reduce the failure rate of the pump.

2. Lubrication: IMO screw pump shall be lubricated regularly according to different models and service conditions to improve pump efficiency and extend service life.

3. Check fasteners: regularly check the tightness and status of fasteners to avoid leakage and failure due to looseness or corrosion.

4. Check the mechanical seal: the mechanical seal is the core part of IMO screw pump, which must be checked and replaced regularly to avoid leakage and discharge.

5. Check the motor: the motor of IMO screw pump is the power source of the pump, Viking The running state and temperature of the motor, as well as the smoothness and lubrication of the motor bearing should be checked regularly.

6. Maintenance of pump safety: The use and maintenance of IMO screw pump must comply with safety regulations to prevent accidents and personal injuries.

In short, correct installation and maintenance is the key to ensure the long-term stable operation of IMO screw pump. For users, regular maintenance and timely maintenance can ensure the efficiency, life and safe operation of the pump.