RICKMEIER provides customers with customized solutions for every possible interface and installation (accessory pump, cartridge pump, etc.), and provides various pipeline connections (DIN standard, SAE standard or special design standard), regardless of quantity and batch. A simple pressure reducing valve or a pilot operated external pressure control valve can be integrated into even the largest pump.
Through close cooperation with domestic and international customers, from initial design to prototype and then to mass production, engineers and technicians of RICKMEIER developed Gear pump And the flow range of external gear pump can reach 1~3000 cm3 per revolution, that is, the maximum flow can reach 5000 L/min.
The lowest noise level and highest efficiency of each working point can be achieved by optimizing the flow design and innovative tooth geometry.
The selection of special pumps is as follows
Internal pump (e.g. R5/71)
Features: directly mounted on the transmission
Application: vehicle transmission oil supply
Built-in pump with internal gearing (Example R1,5/?,1]
Distinctive feature: Direct installation in gearboxApplication: 0il supply vehicle transmission
Fuel pump with integrated force control (R49/16)
Features: directly installed on diesel engine, high volumetric efficiency at low speed Application: fuel pre feeding of common rail high-pressure pump
Fuel pump with integrated pressure controlvalve (ExampleR49/16)
Distinctive feature: Direct mounting on the diesel engine, highvolumetric efficiency at low speedApplication: Fuel pre-feed for common rail high-pressurepump
Fuel pump with internal gear (e.g. R4,0/16) ALLWEILER screw pump
Features: directly connected to high-pressure pump, high volumetric efficiency at low speed, integrated pressure control valve, optional external control
Application: fuel pre feeding of common rail high-pressure pump
Fuel pump with internal gearing(Example R4,0/16)
Distinctive feature: Direct attachment to high-pressure pump, highvolumetric efficiency at low speed, integrated pressure controlvalve withoptionalexternal control
Application: Fuel pre-feed for common rail high-pressure pump
Plug in pump with inner wheel (R4/48
Features: directly mounted on the transmission ALL WEILER Screw pump
Application: Oil supply for torque converter gearbox
Plug-in Pump with internal gearing (example R4/48)
Distinctive feature: Direct mounting on the gearboxApplication: 0il supply to torque converter gearbox
Lubricating oil pump with driving wheel (R59/84)
Features: used for oil pan installation, installation with integrated pipeline and additional output with spline.
Application: diesel oil supply
Lubricating oil pump with drive pinion (example R59/84)
Distinctive feature: For installation in oil sump, pumpmounting with integrated channel, additional output withsplined shaft profileApplication: 0il supply diesel engine
Lubricating oil pump with plug-in channel connection (example R59/340
Features: directly installed on the diesel engine housing
Application: diesel oil supply
Lubricating oil pump with plug-in pipe connections (example R59/340)Distinctive feature: Direct mounting on diesel engine housingApplication: 0il supply diesel engine
Lubrication pump with driving wheel (example R49/338
Features: used for oil pan installation, with integrated pipeline installation
Application: gas engine fuel supply
Lubricating oil pump with drive pinion (example R49/338)Distinctive feature: For installation in oil sump, pumpmounting with integrated channelApplication: 0il supply gas engine
Lube oil pump with drive wheel (R79/520 ALLWEILER
Features: used for installation in oil pan, integrated safety valve
Application: diesel oil supply
Lubricating oil pumpwith drive pinion (example R?9/520)
Distinctive feature: For installation in oil sump, integratedpressure relief valveApplication: 0il supply diesel engine
Lubricating oil pump with driving wheel (example R99/800
Features: plug-in pump, used for installation in the engine housing, with integrated relief valve and integrated check valve.
Application: diesel oil supply
Lubricating oil pump with drive pinion(example R99/800]
Distinctive feature: plug-in pump for installation in motorhousing, with integrated pressure relief valve, withintegrated non-return valveApplication: 0il supply diesel engine
Double lubricating oil pump (e.g. R93/1720)
Features: It is directly installed on the gear box, integrated with a flap valve, and can maintain a constant flow direction when the rotation direction changes.
Purpose: turbine/compressor gearbox oil supply ALLWEILER
Lubricating oil pump with two pump stages (example R93/1?20)
Distinctive feature: Direct mounting on the gear housing, withintegrated flap valves for constant flow direction with changingdirection of rotation
Application: 0il supply Turbine/compressor gearbox
Lubricating oil pump with drive gear (R109/2240
Features: Directly mounted on the engine housing, with pilot operated pressure control valve and external control device
Application: diesel oil supply
Lubricating oil pump with drive pinion (example R109/2240)
Distinctive feature: Direct mounting on motor housing, with pilotoperated pressure controlvalve with external controlApplication: 0il supply diesel engine
Lubricating oil pump with DIN flange (example R109/2360) ALLWEILER
Features: Directly mounted on the engine housing, with pilot operated pressure control valve and external control device
Application: diesel oil supply
Lubricating oil pump with DIN flanges (example R109/2360)
Distinctive feature: Direct mounting on motor housing, withpilot operated pressure control valve with external controlApplication: 0il supply diesel engine
