IMO screw pump It is a common industrial pump used to transport high viscosity liquid and corrosive medium. To extend IMO Screw pump The following are some suggestions for maintenance:

Check the working condition of the pump regularly: check the temperature, noise and vibration of the pump every day to ensure the normal operation of the pump. If any abnormality is found, troubleshooting shall be carried out immediately.

Regularly replace the seal ring and the internal wearing parts of the pump: The seal ring is an important part of the IMO screw pump, which should be regularly inspected and replaced to ensure the sealing performance of the pump. In addition, according to the service time and conditions, the vulnerable parts inside the pump, such as screw, housing and sliding bearing, shall be replaced regularly to reduce the risk of wear and leakage. IMO agent

Clean the inside and outside of the pump: clean the inside and outside of the pump regularly to avoid the accumulation and damage of sediment, particles and corrosive substances. Pay attention to the use of appropriate cleaning agents and follow the cleaning methods in the operation manual.

Keep proper lubrication: according to the instructions of the operation manual, fill proper lubricating oil or grease regularly to reduce the friction and wear of the pump. At the same time, regularly check the operation of the lubrication system to ensure adequate supply of lubricating oil or grease.

Protect the casing of the pump: the casing of IMO screw pump should be kept dry and clean to prevent corrosion and wear. In harsh environment, it can be considered to add a protective cover or shell to protect the external structure of the pump.

Avoid overload and overheating: When using IMO screw pump, it is very important to avoid overload and overheating. Ensure that the operating parameters of the pump are within the rated range to prevent overload operation and overheating, which may cause damage to the pump.

Regular maintenance: regular maintenance is the key to extend the service life of IMO screw pump. Regularly check and replace key components, lubricate and clean them, and regularly check and maintain the motor and control system to maintain the normal operation of the pump. ALLWEILER

In short, regular inspection, cleaning and maintenance is the key to the maintenance of IMO screw pump. Follow the instructions in the operation manual and develop a regular maintenance plan, which can effectively extend the service life of IMO screw pump and maintain its efficient work. ALLWEILER screw pump