IMO screw pump It is a common industrial equipment, used to transport various liquids, such as water, oil, chemicals, etc. During operation and maintenance Screw pump Pay attention to the following aspects to ensure its safety and normal operation.

Operation safety precautions:

Safety valve: each screw pump shall be equipped with a safety valve to ensure that the system pressure will not exceed the rated value. During operation, the normal operation of the safety valve must be ensured to avoid equipment damage or casualties caused by overpressure.

Temperature control: the screw pump will generate friction heat when working, so the pump body temperature must be controlled to avoid equipment failure or leakage caused by overheating. The temperature can be controlled by cooling the system or by reducing the speed of the pump body.

Leakage monitoring: the seals of the screw pump are easy to wear, leading to leakage. Therefore, it is necessary to regularly check the leakage and repair or replace the seals in time to ensure the normal operation of the pump and the safety of the environment.

Reverse rotation is prohibited: reverse rotation of the screw pump is prohibited, because reverse rotation will lead to blockage of the pump channel, or even damage to the pump. Before operation, it is required to confirm that the pump turns correctly, and it is strictly prohibited to start and stop frequently.

Precautions for maintenance:

Replacement of lubricating oil: the screw pump needs lubricant to reduce friction and wear during operation. The lubricating oil shall be replaced regularly to maintain good lubrication condition and extend the service life of the pump. IMO agent

Constant temperature environment: screw pump usually needs to work within a certain temperature range. Attention shall be paid to prevent the pump body from overheating or supercooling, so as not to affect the normal operation and safety of the pump.

Regular inspection: regularly inspect all parts of the screw pump, such as couplings, motors, bearings, etc. If any problem is found, it shall be repaired or replaced in time to avoid the occurrence of failure. COLFAX agent

Cleaning and maintenance: keep the screw pump clean and dry to prevent impurities from entering the pump, causing blockage or wear. Clean the pump body and filter regularly and keep the surrounding environment clean.

In a word, the operation safety and maintenance of the screw pump are the key to ensure the normal operation and working life of the equipment. During operation, special attention shall be paid to safety valve, temperature control, leakage monitoring and disabling reverse rotation. In terms of maintenance, lubricating oil replacement, constant temperature environment, regular inspection, cleaning and maintenance are all matters needing attention. Only correct operation and timely maintenance can ensure the safety and long-term stable operation of the screw pump. CIRCOR SECCO