IMO screw pump As a commonly used hydraulic transmission equipment, it plays an important role in industrial production. However, Screw pump In the process of long-term use, sometimes the problem of hydraulic leakage occurs. This will not only reduce the efficiency of the equipment, but also may have a certain impact on the normal operation of the production line. Therefore, solving the hydraulic leakage problem of screw pump is one aspect that we need to pay attention to.

To solve the problem of hydraulic leakage of screw pump, it is necessary to understand the causes of hydraulic leakage first. Common reasons for hydraulic leakage of screw pump are as follows:

Aging or damage of seals: there are a lot of seals in the screw pump, such as shaft seal, rubber ring, O-ring, etc. These seals are easy to be aged, damaged or deformed due to long-term use or external force, resulting in hydraulic leakage. IMO agent

Wear of pump body: friction between pump body and internal parts will lead to wear of pump body after a long time of use, which will cause hydraulic leakage.

Overload or overpressure: if the screw pump exceeds its maximum load or working pressure during use, it will cause hydraulic leakage.

Next, I will introduce how to solve the hydraulic leakage problem of screw pump from the following aspects.

1、 Timely replace the seals: for the hydraulic leakage of the screw pump, first check whether the seals of the pump body are aging, damaged or deformed. If any defective seal is found, it shall be replaced in time to ensure the normal use of the pump. COLFAX agent

2、 Regular inspection and maintenance: in order to prevent hydraulic leakage, the screw pump needs to be inspected and maintained regularly during normal use. It includes cleaning the pump body, checking whether the seals are intact, and checking whether the pump body is worn. Only regular maintenance can ensure the normal operation of the screw pump and prevent hydraulic leakage.

3、 Reasonably control the load and pressure: when using the screw pump, operate according to its rated load and rated working pressure. Do not exceed its bearing range, otherwise it may cause hydraulic leakage. Therefore, reasonable control of load and pressure is one of the keys to effectively solve the problem of hydraulic leakage. CIRCOR SECCO

4、 Timely find and handle faults: during the use of screw pump, if hydraulic leakage is found, stop the pump for inspection in time. Repair or replace relevant parts according to the specific situation of leakage to ensure the normal operation of the equipment.

5、 Strengthen the management of the hydraulic system: reasonable management of the hydraulic system can also effectively prevent the hydraulic leakage of the screw pump. Hydraulic system management includes cleaning and replacement of hydraulic oil, training and management of operators, etc. By strengthening management, the reliability of hydraulic system can be improved and the risk of hydraulic leakage can be reduced.

To sum up, we need to pay attention to the hydraulic leakage of screw pump and take active measures to solve it. Reasonable replacement of seals, regular inspection and maintenance, reasonable control of load and pressure, timely detection and treatment of faults, and strengthening the management of hydraulic system are all effective ways to solve the problem of hydraulic leakage of screw pump. As long as we pay attention to and strictly implement these methods, we can improve the working efficiency of the screw pump, reduce the occurrence of hydraulic leakage, and ensure the normal operation of the production line.