ALLWEILER screw pump It is a centrifugal pump used to transport various liquids. Its working principle is to gradually push the liquid along the axial direction and provide the required flow and pressure through the rotation of the screw.

stay ALL WEILER Screw pump There are two key components: screw and pump body. The screw is usually composed of two parts, one is threaded screw and the other is fixed screw. The threaded screw pushes the liquid through the rotating movement of the motor, while the fixed screw plays the role of positioning and support.

When the liquid enters the ALLWEILER screw pump manufacturer, it first enters the pump body through the suction port. Then, the liquid is pushed into the push chamber of the pump body under the rotation of the threaded screw. The rotation direction of the threaded screw is opposite to that of the pump body, so the rotation of the threaded screw pushes the liquid forward.

Before the liquid is pushed to the outlet of the pump body, the liquid passes through each push room of the pump body, and the volume of each room gradually decreases. This design allows the screw pump to generate pressure during suction and push. The pressure depends on the liquid flow and the geometry of the pump body.

In the working process of screw pump, the working surface of screw and pump body usually needs to be lubricated and cooled by lubricating oil. This lubricating oil is injected into the shaft seal part of the screw pump through the oil seal to form an oil film, which reduces friction and wear between the screw and the pump body.

Due to its special structure and working principle, ALLWEILER screw pump can be used for the transportation of various fluids. The agents of ALLWEILER screw pump include low viscosity liquid, high viscosity liquid, particulate matter, mud, liquid gas mixture, etc. The selection of pump body materials and sealing materials can be adjusted according to different working conditions to meet specific transportation requirements.

In general, ALLWEILER screw pump pushes the liquid out through the rotating movement of the screw, and generates the required flow and pressure during the transportation process. The working principle of the pump makes it widely used in the industrial field of fluid transportation.