IMO screw pump It is a common industrial pump, which is used to transport high viscosity liquids and mixtures, and is widely used in chemical, petroleum, food, pharmaceutical and other industries. To ensure that Screw pump It is very important to carry out maintenance for normal operation and prolong service life. The following are some key steps and precautions to explain how to properly maintain the IMO screw pump.

Check the pump body regularly: first, check the pump body and connecting parts regularly. Check the pump body for cracks, wear, corrosion and other problems to ensure the integrity and normal working condition of the pump body. At the same time, check the connecting parts, such as flanges and bolts, to ensure that the connection is tight.

Maintenance of shaft seal: the shaft seal is an important component to keep the separation of the medium inside and outside the pump, and must be maintained and replaced regularly. Check the shaft seal for oil or liquid leakage, and replace it if necessary. In addition, the shaft seal shall be cleaned regularly to prevent the cover from rusting.

Check the lubrication system: the lubrication system is critical to the normal operation of the pump. Regularly check the oil level and quality of lubricating oil to ensure that the lubricating system works normally. If necessary, replace the lubricating oil in time and clean the lubricating oil tank. IMO agent

Clean the inlet and outlet pipes: because the medium conveyed by the pump may contain solid particles or suspended solids, the inlet and outlet pipes are easy to be blocked. Therefore, the inlet and outlet pipes should be cleaned regularly to prevent the influence of blockage on the pump.

Regular cleaning of the pump cavity: the cavity of the slot type screw pump is easy to accumulate impurities and dirt. Regular cleaning of the screw pump cavity is an important measure to keep the screw pump working normally. Proper solvent can be used for cleaning to ensure that the inside of the pump chamber is clean. ALLWEILER

Pay attention to temperature and pressure limits: when using IMO screw pump, pay attention to the temperature and pressure limits of the medium. Exceeding the tolerance range of the pump will cause damage to the pump. Therefore, before using the pump, it is necessary to understand the temperature and pressure limits of the pump and ensure that the medium is in the proper temperature and pressure range.

Attention to vibration and noise: vibration and noise are common manifestations of screw pump failure, which may be caused by imbalance, bearing damage or accumulation of impurities. In case of abnormal vibration or noise of the pump, stop the pump immediately for inspection and troubleshooting. ALLWEILER screw pump

Fixing the pump bracket: the screw pump will produce vibration during operation, so it is very important to ensure that the pump bracket is fixed. Regularly check the support and mounting bolts to ensure their stability and safety.

In short, correct maintenance is the key to ensure the normal operation and prolong the service life of IMO screw pump. Regular inspection of the pump body, maintenance of the shaft seal, cleaning of the inlet and outlet pipes, cleaning of the pump chamber, attention to temperature and pressure limits, inspection and maintenance of the lubrication system, attention to vibration and noise, and fixing of the pump support are all important steps for the maintenance of IMO screw pump. At the same time, the maintenance plan shall be formulated according to the actual situation, and the screw pump shall be regularly maintained to ensure its normal operation and reliability. COLFAX agent