IMO screw pump It has six advantages: reliable quality, long service life, low noise, low vibration, never crash, and fine workmanship. It can not only pump moving liquids, but also transport some media that are difficult to move. It has many advantages such as self-priming pump, submersible pump, canned motor pump, mud pump and impurity pump. Spacious flow and excellent passing function allow large particles with a diameter of 10 mm to pass through. When pumping mud and impurities, the pump is hardly worn. The lift and flow can be adjusted steplessly by opening the air valve.
Screw pump It is convenient to use and reliable to work. It only needs to open and close the air valve when starting or stopping. Even if the pump runs without medium for a long time or stops suddenly due to unexpected circumstances, it will not be damaged. In case of overload, the pump will automatically stop and have self-protection function. When the load returns to normal, the pump can actively start and run. The pneumatic diaphragm pump does not need to be lubricated with oil, and even if it is idling, it will not affect the pump, which is a major feature of this pump. It can transport viscous liquid (viscosity below 10000 centipoises).
Screw pump can pump all kinds of corrosive liquid, granular liquid, high viscosity, volatile, flammable and toxic liquid. It is very reliable to use screw pump to transport fuel, gunpowder and explosives, because sparks cannot occur after the screw pump is grounded; The pneumatic diaphragm pump will not generate heat when running, and the machine will not overheat; Because the pneumatic diaphragm pump stirs the fluid the least, the fluid will not overheat.
Since the 1990s, with the rapid development of China's chemical industry and domestic market, enterprises and manufacturers have increasingly strict requirements on the transportation of corrosive media. The leakage of toxic and corrosive media has greatly affected the safety of operators and environmental pollution. Pneumatic diaphragm pump can effectively prevent and deal with such problems. The pneumatic diaphragm pump is very suitable for the working environment with high pollution, high danger, strong acid solution, low noise and clean room. In particular, high-tech professions such as printed circuit board (PCB), semiconductor profession, packaging profession, super corrosive transportation, photoelectric profession, etc.
Generally speaking, when transporting special or high-purity media, the leakage of media can be minimized to cause unnecessary pollution and waste. If necessary, the above two functions of the electronic pneumatic diaphragm pump can be used to ensure the safety of operators, environment and media pollution. Therefore, pneumatic diaphragm pumps can be widely used to transport special chemical media, providing more convenient, safe and efficient treatment solutions for enterprises.
