IMO screw pump It is a kind of commonly used industrial pump with simple structure, stable operation and strong conveying capacity. Choose the right IMO Screw pump We need to consider the following aspects.

First, we need to know the required pump flow and head. Flow refers to the volume of liquid delivered by the pump per unit time, usually in cubic meters per hour or liters per second. Head refers to the vertical height difference when the pump delivers liquid, usually in meters. According to the actual needs, we can calculate the appropriate flow and head as the basic parameters for the purchase of screw pump.

Secondly, we need to consider the properties and requirements of the liquid. Different liquids have different viscosity, temperature and chemical properties, which will directly affect the parameters of the screw pump. For liquids with high viscosity, screw pumps with appropriate transmission power and speed need to be selected; For liquid with high temperature, it is necessary to select a pump that can resist high temperature; For liquids with special chemical properties, pumps with good corrosion resistance shall be selected.

Next, we need to consider the working environment and conditions. Screw pumps are usually used in the industrial field. According to different working conditions and requirements, we need to select suitable materials and structural forms. For example, for the working conditions where corrosive liquids need to be transported, we need to select the screw pump whose pump body and blades are made of corrosion-resistant materials; For the working condition under high temperature environment, we need to select the pump with high temperature resistant materials.

In addition, we also need to consider other factors such as noise, ease of maintenance, energy efficiency, etc. The sliding screw pump with low noise and easy maintenance can improve the comfort and service life; Choosing an efficient screw pump can reduce operating costs and improve energy efficiency. IMO agent

When selecting IMO screw pump, we can refer to the following steps:

The first step is to determine the required flow and head, as well as the nature of the liquid and the working environment conditions.

The second step is to find a suitable screw pump supplier in the market for consultation and selection according to these basic parameters.

The third step is to communicate the requirements with the supplier in detail and obtain the technical parameters and performance curve of the pump.

Step 4: according to the technical parameters and service commitments, compare the products of different suppliers and select the appropriate screw pump.

The fifth step is price negotiation and purchase.

The sixth step is installation, commissioning and trial operation.

In a word, the selection of suitable IMO screw pump needs to consider many factors such as flow, head, liquid property and working environment conditions, and make the selection based on actual needs. At the same time, with the support of suppliers and technical parameters, we can make full comparison and selection to find the products with the highest cost performance ratio. ALLWEILER screw pump